RESEARCH
RESEARCH INTEREST
3D printing / Additive Manufacturing, Manufacturing Processes, Product Design and development,
3D PRINTING/ADDITIVE MANUFACTURING RESEARCH FACILITIES
Prototyping and Innovation Laboratory
Innovation Laboratory
Facilities/machines related to the research interest and available are
- Robotic wire arc additive manufacturing
- Stereolithography
- Selective Laser Sintering
- Selective Laser Melting
- Directed Energy Deposition
- 3D scanning
- Vacuum Casting
- Binder Jetting
- Material Jetting
- Customized 3D printers
- Stratasys FDM 3D printers
- Flashforge Fused Depostion Modeling (FDM) 3D printers
- Various types of Open source 3D printing - Kossel, Mendel etc
- Cube Pro 3D printers
- Cube Duo 3D printers
- Dual Screw Filament Extruder
- Single Screw Filament Extruder
- Etc
Innovation Laboratory
Facilities/machines related to the research interest and available are
- Robotic wire arc additive manufacturing
- Stereolithography
- Selective Laser Sintering
- Selective Laser Melting
- Directed Energy Deposition
- 3D scanning
- Vacuum Casting
- Binder Jetting
- Material Jetting
- Customized 3D printers
- Stratasys FDM 3D printers
- Flashforge Fused Depostion Modeling (FDM) 3D printers
- Various types of Open source 3D printing - Kossel, Mendel etc
- Cube Pro 3D printers
- Cube Duo 3D printers
- Dual Screw Filament Extruder
- Single Screw Filament Extruder
- Etc
RESEARCH GRANT THEMES
- Remanufacturing using 3D metal printing, KKP, MOE (Project Leader)
- Development of portable FFB machine, Industrial Grant (Leader)
- Vacuum assisted 3D metal printing, FRGS, MOE (Member)
- Design of special purpose machine prototype for palm oil industry, Industrial Grant (Leader)
- Mechanism of melt pool formation in 3D metal printing, FRGS, MOE. (Leader).
- Development of a new advanced manufacturing technique for 3D metal printing, Science Fund, MOSTI. (Leader).
- 3D printing of composite material, UTeM (Member)
- 3D printed assistive device for disabled person, MOSTI. (Member).
- Rehabilitation using 3D printing technologies, MOSTI. (Member).
- 3D printed amputee device, MTUN. (Member)
- Consolidation characteristics of parts fabricated via open source 3D metal printing, FRGS, MOE. (Leader).
- Mechanical and Structural Characteristics of FDM Parts Manufactured under an Exclusion of Oxygen, FRGS, MOE. (Member).
- Correlation of design parameters of lightweight lattice structures on vibration characteristics and mechanical strength for high efficiency isolator FRGS, MOE. (Member).
- Investigation On Layer Bio-Adhesion Of Fused Filament Fabrication To Enhance Manufacturability, FRGS. (Member).
- Investigation on process-properties relationship with load-bearing performance of lattice-structured cellular material for lightweight applications, FRGS, MOE. (Member).
- Wear Characteristics of ABS Reinforced Carbon Particle As A New Material For FDM Filament, FRGS, MOE. (Member).
- Vacuum System Assisted Fuse Deposition Modelling to Improve Fracture Toughness and Surface Finish, FRGS, MOE. (Member).
- Manufacturability Analysis on Open Source 3D Printed Part, RAGS, MOE. (Member).
- Influences of processing parameters on the mechanical characteristics of porous structure produced via fused deposition modeling, RAGS, MOE. (Member).
- Study on mechanical behavior of plastic material manufactured via 3D printing system UTeM Short Term Grant, UTeM,RM 17,000 (Leader).
- Fundamental Study On The Performance Of A Remotely Controlled Fire Fighting Machine For Use In Hazardous Fire, FRGS, MOE.(Leader).
- Interoperability Analysis Of CAD And Its Effect On Prototype, FRGS, MOE. (Leader).
- Analysis of data exchange in CAD and its relation to rapid prototyping technologies UTeM Short Term Grant, UTeM. (Leader).
- Design And Fabrication Of Fire Fighting Machine, UTeM Short Term Grant, UTeM. (Leader).
- Fatigue Analysis And Optimisation Of Unmanned All-Terrain Vehicle (UAV): Mechanical Structure Approach, UTeM Short Term Grant, UTeM. (Leader).
- Comparison of Two and Three Plate Molds Plastic Injection Mold Design, UTeM Short Term Grant, UTeM. (Member).
REASEARCH PUBLICATION
Journal
NA Rosli, M.R Alkahari, FR Ramli, M Fadzli bin Abdollah, Parametric Optimisation of Micro Plasma Welding for Wire Arc Additive Manufacturing by Response Surface Methodology, Manufacturing Technology 22 (1), 59-70.
M.R Alkahari, N.ARosli, S.N.A Majid, S.Maidin, Properties Of 3D Printed Structure Manufactured With Integrated Pressing Mechanism In FDM, Journal Of Mechanical Engineering Research & Developments, Vol. 44, No. 2, 2021
N.A Rosli, M.R Alkahari, M.F Abdollah, S. Maidin, Review on effect of heat input for wire arc additive manufacturing process, Journal of Materials Research and Technology, Vol 11, 2127-2145, 2021
N. Rosli, M.R. Alkahari, F.R. Ramli, M.F. Abdollah, Influence Of Process Parameter On The Height Deviation Of Weld Bead In Wire Arc Additive Manufacturing, International Journal of Mechanical and Production, Vol. 10, Issue 3, Jun 2020, 1165-1176.
GD Lim, MJ Abd Latif, MR Alkahari, MS Yob, S Thapliyal, LR Threemurty, Optimization Of Tensile Strength And Processing Time Using Pcr-Topsis Method For Fdm Process, Journal of Advanced Manufacturing Technology (JAMT) 14 (3), 2020.
FR Ramli, MA Nazan, MR Alkahari, MA Abdullah, MN Sudin, SG Herawan, Dimensional Accuracy Of Fused Filament Fabrication By Cassava Adhesion On Printing Platform, Journal of Advanced Manufacturing Technology (JAMT) 14 (2 (1), 2020
SNH Mazlan, AZA Kadir, NHA Ngadiman, MR Alkahari, Evaluation of geometrical benchmark artifacts containing multiple overhang lengths fabricated using material extrusion technique, Journal of Mechanical Engineering and Sciences 14 (3), 7296-7308
N. Rosli, M.R. Alkahari, F.R Ramli, M.N Sudin, S. Maidin, Influence of Process Parameters in Wire and Arc Additive Manufacturing (WAAM) Process, Journal of Mechanical Engineering, Vol 17(2), 69-78, 2020.
N. A. Rosli, M.R. Alkahari, F. R. Ramli, M. N. Sudin, S. Maidin, Single Layer Formation of Plasma Based Wire Arc Additive Manufacturing, Vol 8, No 3 (2020).
J. Li, M.R. Alkahari, N. Rosli, R. Hasan, M. Sudin, and F.R Ramli, Review of Wire Arc Additive Manufacturing for 3D Metal Printing, Int. J. Automation Technol., Vol.13, No.3, pp. 346-353, 2019.
A.A Muhamad Damanhuri, A. Hariri, M.R. Alkahari, M.H.F Md Fauadi, and S.F Zainal Bakri, Indoor Air Concentration from Selective Laser Sintering 3D Printer using Virgin Polyamide Nylon (PA12) Powder: A Pilot Study, International Journal of Integrated Engineering, Vol. 11 No. 5 (2019) 140-149.
A.A Muhamad Damanhuri, A. Hariri, M.H.F Md Fauadi, M.R. Alkahari, M.R Omar, Emission of selected Environmental Exposure from Selective Laser Sintering (SLS) Polyamide Nylon (PA12) 3D printing Process, Journal of Safety, Health and Ergonomics, Vol. 1 No. 1 (2019) p. 1-6.
N.A. Rosli, M.R. Alkahari, F.R. Ramli, S. Maidin, M.N. Sudin, S. Subramoniam And T. Furumoto, Design and Development Of A Low-Cost 3D Metal Printer, Journal of Mechanical Engineering Research and Developments, 41(3), 47-54, 2018.
S.N.H.Mazlan, M.R.Alkahari, F.R.Ramli and M.N.Sudin, Manufacturability of mechanical structure fabricated using entry level 3D printer, Journal of Mechanical Engineering, 5(3), pp. 98-122, 2018.
S.N.H.Mazlan, M.R. Alkahari, F. R. Ramli, N.A Maidin, M.N. Sudin, A.R. Zolkaply, Surface Finish and Mechanical Properties of FDM Part after Blow Cold Vapor Treatment, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 48, Issue 2, 148-155, 2018.
M. S. Azmi, R. Ismail, R. Hasan and M. R. Alkahari, Vibration Analysis of Fused Deposition Modelling Printed Lattice Structure Bar for Application in Automated Device, International Journal of Engineering & Technology, 7 (3.17) 21-24, 2018.
Nazan, M. A., F. R. Ramli, M.R. Alkahari, M. N. Sudin, and M. A. Abdullah. Process Parameter Optimization of 3D Printer Using Response Surface Method." Vol. 12, No. 7, ARPN Journal of Engineering and Applied Sciences, 2291-2296, 2017
F.R. Ramli, M.S.M. Faudzie, M.A. Nazan, M.R. Alkahari, M.N. Sudin, S. Mat and S.N. Khalil, Dimensional accuracy and surface roughness of part features manufactured by open source 3D printer, ARPN Journal of Engineering and Applied Sciences, 1139, 2018.
N. A. Rosli, R. Hasan, W.H. Ng, M.K. Baharudin and M. R. Alkahari, Investigation on Process-Properties Relationship with Mechanical Properties of Lattice-Structured Cellular Material for Lightweight Application, International Journal of Engineering & Technology, 7 (3.17), 1-4, 2018
M.N. Sudin, F.R. Ramli, M.R. Alkahari, M. A. Abdullah, Comparison of wear behavior of ABS and ABS composite parts fabricated via fused deposition modelling, 5(1), 164-169, 2018.
A.A Yusof, M.K. Mohamad Nor, S.A Shamsudin, M.R. Alkahari, Kinematic and Computational Fluid Dynamics Analysis of an Underwater Manipulator Arm in Streamline and Blunt Body Arrangement, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 47, Issue 1) 69-88, 2018.
S. N. A. Majid, M.R. Alkahari, F. R. Ramli, S. Maidin, C.F. Tan, M.N. Sudin, Influence of Integrated Pressing during Fused Filament Fabrication on Tensile Strength and Porosity, Journal of Mechanical Engineering, Vol SI 3 (2), 185-197, 2017.
T. Furumoto, A Koizumi, M.R Alkahari, R Anayama, A Hosokawa, R Tanaka, Permeability and strength of a porous metal structure fabricated by additive manufacturing, Journal of Materials Processing Technology 219, 10-16, 2015.
S Maidin, HS Loo, M.R Alkahari, KF Samat, SH Yahaya, Bone Scaffold Geometrical Design And Material Selection By Using Analytical Hierarchy Process For Additive Manufacturing Process, Jurnal Teknologi, 77 (32) 2015.
M.B. Ali, K. A. Zakaria, S. Abdullah, M.R. Alkahari, "Correlation of Impact Energy from Instrumented Charpy Impact", Applied Mechanics and Materials, Vol. 815, pp. 221-226, Nov. 2015
FR Ramli, MI Jailani, H Unjar, M.R Alkahari, MA Abdullah, integrated recycle system concept for low cost 3D-printer sustainability, Proceedings of Mechanical Engineering Research Day 2015: MERD'15 2015, 77-78.
M.R Alkahari, T Furumoto, T Ueda, A Hosokawa, Consolidation characteristics of ferrous-based metal powder in additive manufacturing, Journal of Advanced Mechanical Design, Systems, and Manufacturing, 8 (1) JAMDSM0009-JAMDSM000 (2014).
M.R Alkahari, T Furumoto, T Ueda, A Hosokawa, Melt Pool and Single Track Formation in Selective Laser Sintering/Selective Laser Melting, Advanced Materials Research 933, 196-201, 2014.
T Furumoto, T Ueda, M.R Alkahari, A Hosokawa, Investigation of laser consolidation process for metal powder by two-color pyrometer and high-speed video camera, CIRP Annals-Manufacturing Technology 62 (1), 223-226, 2013.
NSA Bakar, M.R Alkahari, H Boejang, Analysis on fused deposition modelling performance, Journal of Zhejiang University SCIENCE A 11 (12), 972-977, 2010.
M.R Alkahari, T Furumoto, T Ueda, A Hosokawa, R Tanaka, MSA Aziz, Thermal conductivity of metal powder and consolidated material fabricated via selective laser melting, Key Engineering Materials 523, 244-249, 2012.
T Furumoto, M.R Alkahari, T Ueda, MSA Aziz, A Hosokawa, Monitoring of laser consolidation process of metal powder with high speed video camera, Physics Procedia 39, 760-766, 2012.
CF Tan, S Singh, R Singh, MR Alkahari, Water Pressure Loss Analysis of Mobile Machine for Fire Fighting Purpose, International Journal of Soft Computing and Engineering (IJSCE) 2 (1), 470-473.
AKM Nurul Amin, M.R Alkahari, M.M. Razman, Influence of Chatter of VMC Arising during End Milling Operation and Cutting Conditions on Quality of Machined Surface, International Islamic University Malaysia Engineering Journal. Vol. 2, No.1, 2001. Page 29 – 38.
M.R Alkahari, N.ARosli, S.N.A Majid, S.Maidin, Properties Of 3D Printed Structure Manufactured With Integrated Pressing Mechanism In FDM, Journal Of Mechanical Engineering Research & Developments, Vol. 44, No. 2, 2021
N.A Rosli, M.R Alkahari, M.F Abdollah, S. Maidin, Review on effect of heat input for wire arc additive manufacturing process, Journal of Materials Research and Technology, Vol 11, 2127-2145, 2021
N. Rosli, M.R. Alkahari, F.R. Ramli, M.F. Abdollah, Influence Of Process Parameter On The Height Deviation Of Weld Bead In Wire Arc Additive Manufacturing, International Journal of Mechanical and Production, Vol. 10, Issue 3, Jun 2020, 1165-1176.
GD Lim, MJ Abd Latif, MR Alkahari, MS Yob, S Thapliyal, LR Threemurty, Optimization Of Tensile Strength And Processing Time Using Pcr-Topsis Method For Fdm Process, Journal of Advanced Manufacturing Technology (JAMT) 14 (3), 2020.
FR Ramli, MA Nazan, MR Alkahari, MA Abdullah, MN Sudin, SG Herawan, Dimensional Accuracy Of Fused Filament Fabrication By Cassava Adhesion On Printing Platform, Journal of Advanced Manufacturing Technology (JAMT) 14 (2 (1), 2020
SNH Mazlan, AZA Kadir, NHA Ngadiman, MR Alkahari, Evaluation of geometrical benchmark artifacts containing multiple overhang lengths fabricated using material extrusion technique, Journal of Mechanical Engineering and Sciences 14 (3), 7296-7308
N. Rosli, M.R. Alkahari, F.R Ramli, M.N Sudin, S. Maidin, Influence of Process Parameters in Wire and Arc Additive Manufacturing (WAAM) Process, Journal of Mechanical Engineering, Vol 17(2), 69-78, 2020.
N. A. Rosli, M.R. Alkahari, F. R. Ramli, M. N. Sudin, S. Maidin, Single Layer Formation of Plasma Based Wire Arc Additive Manufacturing, Vol 8, No 3 (2020).
J. Li, M.R. Alkahari, N. Rosli, R. Hasan, M. Sudin, and F.R Ramli, Review of Wire Arc Additive Manufacturing for 3D Metal Printing, Int. J. Automation Technol., Vol.13, No.3, pp. 346-353, 2019.
A.A Muhamad Damanhuri, A. Hariri, M.R. Alkahari, M.H.F Md Fauadi, and S.F Zainal Bakri, Indoor Air Concentration from Selective Laser Sintering 3D Printer using Virgin Polyamide Nylon (PA12) Powder: A Pilot Study, International Journal of Integrated Engineering, Vol. 11 No. 5 (2019) 140-149.
A.A Muhamad Damanhuri, A. Hariri, M.H.F Md Fauadi, M.R. Alkahari, M.R Omar, Emission of selected Environmental Exposure from Selective Laser Sintering (SLS) Polyamide Nylon (PA12) 3D printing Process, Journal of Safety, Health and Ergonomics, Vol. 1 No. 1 (2019) p. 1-6.
N.A. Rosli, M.R. Alkahari, F.R. Ramli, S. Maidin, M.N. Sudin, S. Subramoniam And T. Furumoto, Design and Development Of A Low-Cost 3D Metal Printer, Journal of Mechanical Engineering Research and Developments, 41(3), 47-54, 2018.
S.N.H.Mazlan, M.R.Alkahari, F.R.Ramli and M.N.Sudin, Manufacturability of mechanical structure fabricated using entry level 3D printer, Journal of Mechanical Engineering, 5(3), pp. 98-122, 2018.
S.N.H.Mazlan, M.R. Alkahari, F. R. Ramli, N.A Maidin, M.N. Sudin, A.R. Zolkaply, Surface Finish and Mechanical Properties of FDM Part after Blow Cold Vapor Treatment, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 48, Issue 2, 148-155, 2018.
M. S. Azmi, R. Ismail, R. Hasan and M. R. Alkahari, Vibration Analysis of Fused Deposition Modelling Printed Lattice Structure Bar for Application in Automated Device, International Journal of Engineering & Technology, 7 (3.17) 21-24, 2018.
Nazan, M. A., F. R. Ramli, M.R. Alkahari, M. N. Sudin, and M. A. Abdullah. Process Parameter Optimization of 3D Printer Using Response Surface Method." Vol. 12, No. 7, ARPN Journal of Engineering and Applied Sciences, 2291-2296, 2017
F.R. Ramli, M.S.M. Faudzie, M.A. Nazan, M.R. Alkahari, M.N. Sudin, S. Mat and S.N. Khalil, Dimensional accuracy and surface roughness of part features manufactured by open source 3D printer, ARPN Journal of Engineering and Applied Sciences, 1139, 2018.
N. A. Rosli, R. Hasan, W.H. Ng, M.K. Baharudin and M. R. Alkahari, Investigation on Process-Properties Relationship with Mechanical Properties of Lattice-Structured Cellular Material for Lightweight Application, International Journal of Engineering & Technology, 7 (3.17), 1-4, 2018
M.N. Sudin, F.R. Ramli, M.R. Alkahari, M. A. Abdullah, Comparison of wear behavior of ABS and ABS composite parts fabricated via fused deposition modelling, 5(1), 164-169, 2018.
A.A Yusof, M.K. Mohamad Nor, S.A Shamsudin, M.R. Alkahari, Kinematic and Computational Fluid Dynamics Analysis of an Underwater Manipulator Arm in Streamline and Blunt Body Arrangement, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 47, Issue 1) 69-88, 2018.
S. N. A. Majid, M.R. Alkahari, F. R. Ramli, S. Maidin, C.F. Tan, M.N. Sudin, Influence of Integrated Pressing during Fused Filament Fabrication on Tensile Strength and Porosity, Journal of Mechanical Engineering, Vol SI 3 (2), 185-197, 2017.
T. Furumoto, A Koizumi, M.R Alkahari, R Anayama, A Hosokawa, R Tanaka, Permeability and strength of a porous metal structure fabricated by additive manufacturing, Journal of Materials Processing Technology 219, 10-16, 2015.
S Maidin, HS Loo, M.R Alkahari, KF Samat, SH Yahaya, Bone Scaffold Geometrical Design And Material Selection By Using Analytical Hierarchy Process For Additive Manufacturing Process, Jurnal Teknologi, 77 (32) 2015.
M.B. Ali, K. A. Zakaria, S. Abdullah, M.R. Alkahari, "Correlation of Impact Energy from Instrumented Charpy Impact", Applied Mechanics and Materials, Vol. 815, pp. 221-226, Nov. 2015
FR Ramli, MI Jailani, H Unjar, M.R Alkahari, MA Abdullah, integrated recycle system concept for low cost 3D-printer sustainability, Proceedings of Mechanical Engineering Research Day 2015: MERD'15 2015, 77-78.
M.R Alkahari, T Furumoto, T Ueda, A Hosokawa, Consolidation characteristics of ferrous-based metal powder in additive manufacturing, Journal of Advanced Mechanical Design, Systems, and Manufacturing, 8 (1) JAMDSM0009-JAMDSM000 (2014).
M.R Alkahari, T Furumoto, T Ueda, A Hosokawa, Melt Pool and Single Track Formation in Selective Laser Sintering/Selective Laser Melting, Advanced Materials Research 933, 196-201, 2014.
T Furumoto, T Ueda, M.R Alkahari, A Hosokawa, Investigation of laser consolidation process for metal powder by two-color pyrometer and high-speed video camera, CIRP Annals-Manufacturing Technology 62 (1), 223-226, 2013.
NSA Bakar, M.R Alkahari, H Boejang, Analysis on fused deposition modelling performance, Journal of Zhejiang University SCIENCE A 11 (12), 972-977, 2010.
M.R Alkahari, T Furumoto, T Ueda, A Hosokawa, R Tanaka, MSA Aziz, Thermal conductivity of metal powder and consolidated material fabricated via selective laser melting, Key Engineering Materials 523, 244-249, 2012.
T Furumoto, M.R Alkahari, T Ueda, MSA Aziz, A Hosokawa, Monitoring of laser consolidation process of metal powder with high speed video camera, Physics Procedia 39, 760-766, 2012.
CF Tan, S Singh, R Singh, MR Alkahari, Water Pressure Loss Analysis of Mobile Machine for Fire Fighting Purpose, International Journal of Soft Computing and Engineering (IJSCE) 2 (1), 470-473.
AKM Nurul Amin, M.R Alkahari, M.M. Razman, Influence of Chatter of VMC Arising during End Milling Operation and Cutting Conditions on Quality of Machined Surface, International Islamic University Malaysia Engineering Journal. Vol. 2, No.1, 2001. Page 29 – 38.
Conference Proceedings
N.A Rosli, M.R. Alkahari, M.F Abdollah, S. Maidin, F.R. Ramli, Micro plasma wire arc additive manufacturing of multi-layer single pass structure, Proceedings of Mechanical Engineering Research Day 2020.
M.R Alkahari, N. Rosli, H.N Wahid, A. Putra, M.A Mohd Rosli, M.Z Akop, F.R Ramli, N.A. Rahman,
S.G Herawan, Empowering teaching and learning for Industry 4.0 through development of open source 3D printing project, Proceedings of Innovative Teaching and Learning Research Day 2019, 29 August 2019.
M.S. Hamdan, A. Putra, M.R. Alkahari, Development of 3D-printed vibration dynamic absorber, Proceedings of Mechanical Engineering Research Day 2019, 2019, 282-283, 2019, Centre for Advanced Research on Energy.
M.F.S. Che Hamid, A. Putra, D.H. Kassim, M.R. Alkahari, 3D-printed lattice structure as sound absorber, Proceedings of Mechanical Engineering Research Day 2019, 287-288, Centre for Advanced Research on Energy
Q. Ahsan, A.F.A. Mawardi,S. Subramonian, M.R. Alkahari, A. Putra, Effect of Aluminum Surface Treatment on the Damping Properties of Aluminum-Rubber Bonding System, Proceedings of the International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems, 497-502, 2020, Springer.
Kassim, Dg H; Putra, A; Hamid, MFS Che; M.R. Alkahari, Sound Absorption of BCC Lattice Structures, Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, 69-79, 2020, Springer.
S. Mat, M.R Hussin, F.R. Ramli, M.R. Alkahari, M.R. Jamli, S.I. Abdul Kudus, K. Case, Application of Quality Function Deployment in Product Design and Development: Car Seat Case Study, Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, 81-95, 2020, Springer.
N.A Rosli, M.R. Alkahari, F.R. Ramli, S. Mat, A.A Yusof, Influence of process parameters on dimensional accuracy in GMAW based additive manufacturing, Proceedings of Mechanical Engineering Research Day 2019, pp. 7-9, August 2019.
J. Li , M.R. Alkahari, N.A Rosli, F.R. Ramli, R. Hasan, Effects of current and wire feed direction in WAAM-TIG, Proceedings of Mechanical Engineering Research Day 2019, pp. 14-15, August 2019.
F.R. Ramli, Z.A Said, M.R. Alkahari, S. Mat, M.N Sudin, Topological optimized engine bracket for additive manufacturing, Proceedings of Mechanical Engineering Research Day 2019, pp. 19-20, August 2019.
S. Mat, N.S Tyng, F.R. Ramli, M.R. Alkahari, M.R Jamli , S.I Abdul Kudus, Reverse engineering process of car side mirror using convectional and 3D scanning methods, Proceedings of Mechanical Engineering Research Day 2019, pp. 269-270, August 2019.
L.G Dong, M.R. Alkahari, F.R. Ramli, Surface roughness comparison between printed parts manufactured via open source and commercial 3D printing machine, Proceedings of Innovative Research and Industrial Dialogue’18, July 2018.
N.A Maidin, M.H Ab Rahman, M.R.Alkahari, S.N.H Mazlan, Design for Manufacturability (DFM) of 3D printed parts fabrication using open source 3D printer, 3rd Engineering Technology International Conference (ETIC 2018), 2018.
N.A Rosli, R.Hasan, M.R. Alkahari , Effects of default parameters on properties of FDM printed cubes, Proceedings of Mechanical Engineering Research Day 2018, pp.1-2, 2018.
N.S. Hamdan, M.S. Zainal Kifli, M.R. Alkahari, A.R. Zolkaply, Investigation on the suitability of plastic bottle material as 3D printer filament, Proceedings of Mechanical Engineering Research Day 2018, pp.136-137, 2018.
H. I. Md Yusof, S. A. Shamsudin, M. R. Alkahari, F. R. Ramli, Initial study of safety hazards by heavy transportation on Malaysian roads, 3rd International Conference on Automotive Innovation and Green Energy Vehicle, 2018.
M.N. Ahmad, M.R. Alkahari, M.F. Mohd Basir, Nurul Ain Maidin, Optimization of vacuum casting process parameters using Taguchi method, Proceedings of Mechanical Engineering Research Day 2018, pp. 146-147, May 2018
S.N.H. Mazlan, M.R. Alkahari, N.A. Maidin, F.R. Ramli and M.N. Sudin, G.D. Lim, I.S. Mohamad, Influence of inert gas assisted 3D printing machine on the surface roughness and strength of printed component, Proceedings of Mechanical Engineering Research Day 2018, pp. 154-155, May 2018.
N.A Rosli, R.Hasan, M.R. Alkahari, T. Tokoroyama, Effect of process parameters on the geometrical quality of ABS polymer lattice structure, Proceedings of SAKURA Symposium on Mechanical Science and Engineering, pp. 3-5, November 2017.
M.S. Azmi , R. Ismail , R.Hasan, M.R. Alkahari, T. Tokoroyama, Vibration analysis of FDM printed lattice structure bar, Proceedings of SAKURA Symposium on Mechanical Science and Engineering, pp. 33-55, November 2017.
F.R Ramli, M.ANazan, M.R. Alkahari,, M.N. Sudin and M.A Abdullah, Investigation of warping deformation in fused deposition modelling by sago starch adhesion, International Conference on Design and Concurrent Engineering 2017 & Manufacturing Systems Conference 2017.
M.A Nazan, F.R Ramli, M.R. Alkahari, T. Tokoroyama, N. Umehara, Polymer adhesion investigation on fused deposition modelling machine, , Proceedings of SAKURA Symposium on Mechanical Science and Engineering, pp. 6-7, November 2017.
A.R. Zolkaply, M.R. Alkahari, F.R. Ramli, M.N. Sudin, N.S. Hamdan, Mechanical Properties of 3D Printed Surface under Influence of Chemical Post Processing International, Symposium on Research in Innovation and Sustainability 2017 (ISoRIS ’17) 17-19 July 2017, Malacca, Malaysia.
M.R. Alkahari, S.N.H. Mazlan, O.I. Sun, F.R.Ramli, N.A. Maidin , M.N.Sudin, Manufacturability of Overhang Structure Using Open Source 3D Printer, Proceedings of Mechanical Engineering Research Day 2017, 158-159, 2017.
M.S Azmi, R. Ismail, R. Hasan, M.R Alkahari, Study on dimensional accuracy of lattice structure bar using FDM additive manufacturing, Proceedings of Mechanical Engineering Research Day 2017, 397-398
A. R. Zolkaply, M. R. Alkahari, F. R. Ramli, N. S. Hamdan, M. N. Sudin, Roughness of 3D Printed Surface under Influence of Chemical Post Processing, Proceedings of Mechanical Engineering Research Day 2017.
MA Nazan, FR Ramli, M.R Alkahari, MN Sudin, MA Abdullah, Optimization of warping deformation in open source 3D printer using response surface method, Proceedings of Mechanical Engineering Research Day 2016 2016, 71-72.
R Hasan, MK Baharudin, MM Nasarud’din, MR Alkahari, Fabrication of polymer lattice structure using additive manufacturing for lightweight material, Proceedings of Mechanical Engineering Research Day 2016 2016, 129-130.
Siti Nur Humaira Mazlan, Mohd Rizal Alkahari, Faiz Redza Ramli, Nurul Ain Maidin, Effect of Laser Post-Processing on Surface Roughness of Fused Deposition Modeling (FDM) Part, Innovative Research And Industrial Dialogue 2016 (IRID 2016), Melaka, 20 Dec 2016.
Siti Najatul Aishah Majid, Mohd Rizal Alkahari, Faiz Redza Ramli, Mohd Nizam Sudin, Tan Chee Fai And Dulah Jemat, Mechanical Properties Of 3D Printed Acrylonitrile-Butadiene-Styrene Under Influence Of Different Processing Parameter, International Research Conference and Innovation Exhibition (IRCIE 2016), 18-20 Oktober 2016.
Nor Ana Rosli, Mohd Rizal Alkahari, Faiz Redza Ramli, Shajahan Maidin, Design And Development Of A Low Cost 3D Metal Printer, International Research Conference and Innovation Exhibition (IRCIE 2016), 18-20 Oktober 2016.
S. N. A. Majid, M.R. Alkahari, F. R. Ramli, S. Maidin, C.F. Tan, M.N. Sudin, Effect of mechanical pressing on 3D printed part during FDM processing, An International Conference on Advanced Processes and Systems in Manufacturing 2016 (APSIM), 28 ~ 30 August 2016, Kuala Lumpur.
M.R.Alkahari, F.R.Ramli, S.N.A. Majid, S.Maidin, M.N. Sudin a,b, C.F. Tan,b, A.N.Arsat, Comparative study on mechanical properties of parts manufactured via fused deposition modeling (FDM), Symposium & Exhibition on Additive Manufacturing (SEAM), 26-27 July 2016.
HA Habeeb, MR Alkahari, FR Ramli, R Hasan, S Maidin, Strength and porosity of additively manufactured PLA using a low cost 3D printing, Proceedings of Mechanical Engineering Research Day 2016 2016, 69-70.
M.R Alkahari, Tatsuaki Furumoto, Takashi Ueda, Akira Hosokawa, “Line Consolidation Characteristics of SCM based Metal Powder”, International Conference on Manufacturing, Machine Design and Tribology (ICMDT 2013), KSME/JSME, Busan, Korea, Page 114. (Best Paper Award)
M.R Alkahari, Tatsuaki Furumoto, Takashi Ueda, Akira Hosokawa, Process Visualization of Metal Powder Transformation to Consolidated Structure in Layered Manufacturing-Effect of Laser Parameter, Japan Society of Mechanical Engineer (JSME) 51st General Assembly and Conference, Hokuriku Shin-Etsu, Feb 2014.
M.R Alkahari, Tatsuaki Furumoto, Takashi Ueda, Akira Hosokawa, Ryutaro Tanaka, Mohd Sanusi Abdul Aziz, Study on Sintering Characteristic of Metal Powder - Influence of Laser Scan Speed, Proceedings of Academic Conference, Japan Society for Precision Engineering (JSPE), Hokuriku Shin-Etsu, 2012, pp. 77-78.
N.S Abu Bakar, M.R Alkahari, Mustafar Abdul Kadir, Hambali Boejang, Review on Vacuum Casting Technology, International Conference on Recent and Current Emerging Technologies in Engineering 2009, 23-24 November 2009, Sepang, Malaysia.
Mohd Zaid Akop, M.R Alkahari, Mohd Afzanizam Mohd Rosli, Muhd Ridzuan Mansor, Soft Skills Development of Engineering Undergraduate Students through Formula Varsity, International Congress on Engineering Education (ICEED 2009), Shah Alam, Selangor, Malaysia.
M.R Alkahari, Mohd Zaid Akop, Muhd. Ridzuan Mansor, Mohd Afzanizam Mohd Rosli, Enhancing Student Competency through Formula Varsity Competition, International Conference On Innovation In Teaching And Management Of Higher Education 2009, (ICITM2009), Shah Alam, Malaysia.
M.R Alkahari, Hambali Boejang, Faiz Redza Ramli, Comparison And Analysis Between Prototypes Made From Rapid Protyping And Rapid Tooling Technologies, 2nd International Conference on Science and Technology (ICSTIE 2008), 12th -13th Dec 2008, Pulau Pinang, Malaysia.
Hambali Boejang, Faiz Redza Ramli, M.R Alkahari, Mohd Juzaila Abdul Latif, Mohd Zuhri Mohamed Yusoff, Performance Assessment of Rapid Prototyping Technologies, International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), May 2008, Johor Bharu, Malaysia.
Hambali Boejang, M.R Alkahari, Faiz Redza Ramli, Ooi Sen Jye Analysis Of CAD Data Using Top-Down And Bottom-Up Approach, The 3rd International Conference on Product Design & Development, 12-13 December 2007.Jogjakarta, Indonesia.
M.R Alkahari, F.R. Ramli, M.B Ali, Comparison of Mechanical Behaviour of Coated and Uncoated Self-Pierce Riveted Joint, Proceeding of International Conference on Engineering and ICT 2007, ICEI 2007, November 2007.
M.J Latif, M.R Alkahari, H. Boejang, Numerical Modelling of Transversely Isotropic Elastic Material at Small Strain from Finite Strain Linearization, International Conference on Composite and Nanostucture (IC2MS), April 2006.
F.R. Ramli, M.R. Alkahari, H. Boejang, M.S. Abdul Majid, Comparison of Tensile Bond Strength in Rapid Manufacturing of Knee Implant using Selective Laser Melting, Conference on Application of Design in Mechanical Engineering, Universiti Malaysia Perlis (UniMAP), October 2007.
Li Han, Ken W. Young, M.R Alkahari, A. Chrysanthou, Effect of Sheet Material Coatings on Quality and Strength of Self-Piercing Riveted Joint, SAE Paper 2006-01-0775.
M.R Alkahari, M.J Latif, H. Boejang, Self-Piercing Riveting : An overview and its potential in Malaysian Automotive Industries, National Seminar on Science and its Application in Industries, SSASI 2006.
Li Han, Ken W. Young, M.R Alkahari, A. Chrysanthou, Effect of Sheet Material Coatings on Quality and Strength of Self-Piercing Riveted Joint, Welding and Joining and Fastening, SAE 2006 World Congress & Exhibition, Detroit, MI, USA, April 2006.
AKM Nurul Amin, M.R. Alkahari, M.M. Razman, Investigation of Chatter Arising during End Milling Metal Cutting on Vertical Machining Center (VMC). Proceeding of International Conference on Mechatronics, ICOM 01.
M.R Alkahari, N. Rosli, H.N Wahid, A. Putra, M.A Mohd Rosli, M.Z Akop, F.R Ramli, N.A. Rahman,
S.G Herawan, Empowering teaching and learning for Industry 4.0 through development of open source 3D printing project, Proceedings of Innovative Teaching and Learning Research Day 2019, 29 August 2019.
M.S. Hamdan, A. Putra, M.R. Alkahari, Development of 3D-printed vibration dynamic absorber, Proceedings of Mechanical Engineering Research Day 2019, 2019, 282-283, 2019, Centre for Advanced Research on Energy.
M.F.S. Che Hamid, A. Putra, D.H. Kassim, M.R. Alkahari, 3D-printed lattice structure as sound absorber, Proceedings of Mechanical Engineering Research Day 2019, 287-288, Centre for Advanced Research on Energy
Q. Ahsan, A.F.A. Mawardi,S. Subramonian, M.R. Alkahari, A. Putra, Effect of Aluminum Surface Treatment on the Damping Properties of Aluminum-Rubber Bonding System, Proceedings of the International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems, 497-502, 2020, Springer.
Kassim, Dg H; Putra, A; Hamid, MFS Che; M.R. Alkahari, Sound Absorption of BCC Lattice Structures, Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, 69-79, 2020, Springer.
S. Mat, M.R Hussin, F.R. Ramli, M.R. Alkahari, M.R. Jamli, S.I. Abdul Kudus, K. Case, Application of Quality Function Deployment in Product Design and Development: Car Seat Case Study, Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, 81-95, 2020, Springer.
N.A Rosli, M.R. Alkahari, F.R. Ramli, S. Mat, A.A Yusof, Influence of process parameters on dimensional accuracy in GMAW based additive manufacturing, Proceedings of Mechanical Engineering Research Day 2019, pp. 7-9, August 2019.
J. Li , M.R. Alkahari, N.A Rosli, F.R. Ramli, R. Hasan, Effects of current and wire feed direction in WAAM-TIG, Proceedings of Mechanical Engineering Research Day 2019, pp. 14-15, August 2019.
F.R. Ramli, Z.A Said, M.R. Alkahari, S. Mat, M.N Sudin, Topological optimized engine bracket for additive manufacturing, Proceedings of Mechanical Engineering Research Day 2019, pp. 19-20, August 2019.
S. Mat, N.S Tyng, F.R. Ramli, M.R. Alkahari, M.R Jamli , S.I Abdul Kudus, Reverse engineering process of car side mirror using convectional and 3D scanning methods, Proceedings of Mechanical Engineering Research Day 2019, pp. 269-270, August 2019.
L.G Dong, M.R. Alkahari, F.R. Ramli, Surface roughness comparison between printed parts manufactured via open source and commercial 3D printing machine, Proceedings of Innovative Research and Industrial Dialogue’18, July 2018.
N.A Maidin, M.H Ab Rahman, M.R.Alkahari, S.N.H Mazlan, Design for Manufacturability (DFM) of 3D printed parts fabrication using open source 3D printer, 3rd Engineering Technology International Conference (ETIC 2018), 2018.
N.A Rosli, R.Hasan, M.R. Alkahari , Effects of default parameters on properties of FDM printed cubes, Proceedings of Mechanical Engineering Research Day 2018, pp.1-2, 2018.
N.S. Hamdan, M.S. Zainal Kifli, M.R. Alkahari, A.R. Zolkaply, Investigation on the suitability of plastic bottle material as 3D printer filament, Proceedings of Mechanical Engineering Research Day 2018, pp.136-137, 2018.
H. I. Md Yusof, S. A. Shamsudin, M. R. Alkahari, F. R. Ramli, Initial study of safety hazards by heavy transportation on Malaysian roads, 3rd International Conference on Automotive Innovation and Green Energy Vehicle, 2018.
M.N. Ahmad, M.R. Alkahari, M.F. Mohd Basir, Nurul Ain Maidin, Optimization of vacuum casting process parameters using Taguchi method, Proceedings of Mechanical Engineering Research Day 2018, pp. 146-147, May 2018
S.N.H. Mazlan, M.R. Alkahari, N.A. Maidin, F.R. Ramli and M.N. Sudin, G.D. Lim, I.S. Mohamad, Influence of inert gas assisted 3D printing machine on the surface roughness and strength of printed component, Proceedings of Mechanical Engineering Research Day 2018, pp. 154-155, May 2018.
N.A Rosli, R.Hasan, M.R. Alkahari, T. Tokoroyama, Effect of process parameters on the geometrical quality of ABS polymer lattice structure, Proceedings of SAKURA Symposium on Mechanical Science and Engineering, pp. 3-5, November 2017.
M.S. Azmi , R. Ismail , R.Hasan, M.R. Alkahari, T. Tokoroyama, Vibration analysis of FDM printed lattice structure bar, Proceedings of SAKURA Symposium on Mechanical Science and Engineering, pp. 33-55, November 2017.
F.R Ramli, M.ANazan, M.R. Alkahari,, M.N. Sudin and M.A Abdullah, Investigation of warping deformation in fused deposition modelling by sago starch adhesion, International Conference on Design and Concurrent Engineering 2017 & Manufacturing Systems Conference 2017.
M.A Nazan, F.R Ramli, M.R. Alkahari, T. Tokoroyama, N. Umehara, Polymer adhesion investigation on fused deposition modelling machine, , Proceedings of SAKURA Symposium on Mechanical Science and Engineering, pp. 6-7, November 2017.
A.R. Zolkaply, M.R. Alkahari, F.R. Ramli, M.N. Sudin, N.S. Hamdan, Mechanical Properties of 3D Printed Surface under Influence of Chemical Post Processing International, Symposium on Research in Innovation and Sustainability 2017 (ISoRIS ’17) 17-19 July 2017, Malacca, Malaysia.
M.R. Alkahari, S.N.H. Mazlan, O.I. Sun, F.R.Ramli, N.A. Maidin , M.N.Sudin, Manufacturability of Overhang Structure Using Open Source 3D Printer, Proceedings of Mechanical Engineering Research Day 2017, 158-159, 2017.
M.S Azmi, R. Ismail, R. Hasan, M.R Alkahari, Study on dimensional accuracy of lattice structure bar using FDM additive manufacturing, Proceedings of Mechanical Engineering Research Day 2017, 397-398
A. R. Zolkaply, M. R. Alkahari, F. R. Ramli, N. S. Hamdan, M. N. Sudin, Roughness of 3D Printed Surface under Influence of Chemical Post Processing, Proceedings of Mechanical Engineering Research Day 2017.
MA Nazan, FR Ramli, M.R Alkahari, MN Sudin, MA Abdullah, Optimization of warping deformation in open source 3D printer using response surface method, Proceedings of Mechanical Engineering Research Day 2016 2016, 71-72.
R Hasan, MK Baharudin, MM Nasarud’din, MR Alkahari, Fabrication of polymer lattice structure using additive manufacturing for lightweight material, Proceedings of Mechanical Engineering Research Day 2016 2016, 129-130.
Siti Nur Humaira Mazlan, Mohd Rizal Alkahari, Faiz Redza Ramli, Nurul Ain Maidin, Effect of Laser Post-Processing on Surface Roughness of Fused Deposition Modeling (FDM) Part, Innovative Research And Industrial Dialogue 2016 (IRID 2016), Melaka, 20 Dec 2016.
Siti Najatul Aishah Majid, Mohd Rizal Alkahari, Faiz Redza Ramli, Mohd Nizam Sudin, Tan Chee Fai And Dulah Jemat, Mechanical Properties Of 3D Printed Acrylonitrile-Butadiene-Styrene Under Influence Of Different Processing Parameter, International Research Conference and Innovation Exhibition (IRCIE 2016), 18-20 Oktober 2016.
Nor Ana Rosli, Mohd Rizal Alkahari, Faiz Redza Ramli, Shajahan Maidin, Design And Development Of A Low Cost 3D Metal Printer, International Research Conference and Innovation Exhibition (IRCIE 2016), 18-20 Oktober 2016.
S. N. A. Majid, M.R. Alkahari, F. R. Ramli, S. Maidin, C.F. Tan, M.N. Sudin, Effect of mechanical pressing on 3D printed part during FDM processing, An International Conference on Advanced Processes and Systems in Manufacturing 2016 (APSIM), 28 ~ 30 August 2016, Kuala Lumpur.
M.R.Alkahari, F.R.Ramli, S.N.A. Majid, S.Maidin, M.N. Sudin a,b, C.F. Tan,b, A.N.Arsat, Comparative study on mechanical properties of parts manufactured via fused deposition modeling (FDM), Symposium & Exhibition on Additive Manufacturing (SEAM), 26-27 July 2016.
HA Habeeb, MR Alkahari, FR Ramli, R Hasan, S Maidin, Strength and porosity of additively manufactured PLA using a low cost 3D printing, Proceedings of Mechanical Engineering Research Day 2016 2016, 69-70.
M.R Alkahari, Tatsuaki Furumoto, Takashi Ueda, Akira Hosokawa, “Line Consolidation Characteristics of SCM based Metal Powder”, International Conference on Manufacturing, Machine Design and Tribology (ICMDT 2013), KSME/JSME, Busan, Korea, Page 114. (Best Paper Award)
M.R Alkahari, Tatsuaki Furumoto, Takashi Ueda, Akira Hosokawa, Process Visualization of Metal Powder Transformation to Consolidated Structure in Layered Manufacturing-Effect of Laser Parameter, Japan Society of Mechanical Engineer (JSME) 51st General Assembly and Conference, Hokuriku Shin-Etsu, Feb 2014.
M.R Alkahari, Tatsuaki Furumoto, Takashi Ueda, Akira Hosokawa, Ryutaro Tanaka, Mohd Sanusi Abdul Aziz, Study on Sintering Characteristic of Metal Powder - Influence of Laser Scan Speed, Proceedings of Academic Conference, Japan Society for Precision Engineering (JSPE), Hokuriku Shin-Etsu, 2012, pp. 77-78.
N.S Abu Bakar, M.R Alkahari, Mustafar Abdul Kadir, Hambali Boejang, Review on Vacuum Casting Technology, International Conference on Recent and Current Emerging Technologies in Engineering 2009, 23-24 November 2009, Sepang, Malaysia.
Mohd Zaid Akop, M.R Alkahari, Mohd Afzanizam Mohd Rosli, Muhd Ridzuan Mansor, Soft Skills Development of Engineering Undergraduate Students through Formula Varsity, International Congress on Engineering Education (ICEED 2009), Shah Alam, Selangor, Malaysia.
M.R Alkahari, Mohd Zaid Akop, Muhd. Ridzuan Mansor, Mohd Afzanizam Mohd Rosli, Enhancing Student Competency through Formula Varsity Competition, International Conference On Innovation In Teaching And Management Of Higher Education 2009, (ICITM2009), Shah Alam, Malaysia.
M.R Alkahari, Hambali Boejang, Faiz Redza Ramli, Comparison And Analysis Between Prototypes Made From Rapid Protyping And Rapid Tooling Technologies, 2nd International Conference on Science and Technology (ICSTIE 2008), 12th -13th Dec 2008, Pulau Pinang, Malaysia.
Hambali Boejang, Faiz Redza Ramli, M.R Alkahari, Mohd Juzaila Abdul Latif, Mohd Zuhri Mohamed Yusoff, Performance Assessment of Rapid Prototyping Technologies, International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), May 2008, Johor Bharu, Malaysia.
Hambali Boejang, M.R Alkahari, Faiz Redza Ramli, Ooi Sen Jye Analysis Of CAD Data Using Top-Down And Bottom-Up Approach, The 3rd International Conference on Product Design & Development, 12-13 December 2007.Jogjakarta, Indonesia.
M.R Alkahari, F.R. Ramli, M.B Ali, Comparison of Mechanical Behaviour of Coated and Uncoated Self-Pierce Riveted Joint, Proceeding of International Conference on Engineering and ICT 2007, ICEI 2007, November 2007.
M.J Latif, M.R Alkahari, H. Boejang, Numerical Modelling of Transversely Isotropic Elastic Material at Small Strain from Finite Strain Linearization, International Conference on Composite and Nanostucture (IC2MS), April 2006.
F.R. Ramli, M.R. Alkahari, H. Boejang, M.S. Abdul Majid, Comparison of Tensile Bond Strength in Rapid Manufacturing of Knee Implant using Selective Laser Melting, Conference on Application of Design in Mechanical Engineering, Universiti Malaysia Perlis (UniMAP), October 2007.
Li Han, Ken W. Young, M.R Alkahari, A. Chrysanthou, Effect of Sheet Material Coatings on Quality and Strength of Self-Piercing Riveted Joint, SAE Paper 2006-01-0775.
M.R Alkahari, M.J Latif, H. Boejang, Self-Piercing Riveting : An overview and its potential in Malaysian Automotive Industries, National Seminar on Science and its Application in Industries, SSASI 2006.
Li Han, Ken W. Young, M.R Alkahari, A. Chrysanthou, Effect of Sheet Material Coatings on Quality and Strength of Self-Piercing Riveted Joint, Welding and Joining and Fastening, SAE 2006 World Congress & Exhibition, Detroit, MI, USA, April 2006.
AKM Nurul Amin, M.R. Alkahari, M.M. Razman, Investigation of Chatter Arising during End Milling Metal Cutting on Vertical Machining Center (VMC). Proceeding of International Conference on Mechatronics, ICOM 01.
Chapter in Book
M.T. Mastura, M.R. Alkahari And A.K. Syahibudil Ikhwan, Life Cycle Analysis Of Fused Filament Fabrication: A Review, Design For Sustainability, Green Materials And Processes, pp. 415, 2021.
A.A Yusof, M.K Mohammed Nor, S.A Shamsudin, M.R Alkahari, M. Musa, The development of PANTHER AUV for autonomous underwater vehicle competion challenge 2017/2018, Intelligent Manufacturing & Mechatronics, Lecture Notes in Mechanical Engineering, pp. 259, 2018.
A.A Yusof, M.K Mohammed Nor, S.A Shamsudin, M.R Alkahari, M.S Mohd Aras, M.R.Md Nawawi, Facing the autonomous underwater vehicle competition challenge: The TUAH AUV experience, Intelligent Manufacturing & Mechatronics, Lecture Notes in Mechanical Engineering, pp. 259, 2018.
A.A Yusof, M.K Mohammed Nor, S.A Shamsudin, M.R Alkahari, M. Musa, The development of PANTHER AUV for autonomous underwater vehicle competion challenge 2017/2018, Intelligent Manufacturing & Mechatronics, Lecture Notes in Mechanical Engineering, pp. 259, 2018.
A.A Yusof, M.K Mohammed Nor, S.A Shamsudin, M.R Alkahari, M.S Mohd Aras, M.R.Md Nawawi, Facing the autonomous underwater vehicle competition challenge: The TUAH AUV experience, Intelligent Manufacturing & Mechatronics, Lecture Notes in Mechanical Engineering, pp. 259, 2018.